Low Shipping Rates from £5.95  | ISO 9001:2015  |  Volume Discounts Available  |  Secure Checkout |Phone: 00 44 1935 473824

LABWATER 1 for Laboratory Quality Water

A deioniser ideal for general laboratory applications which typically require up to 5 litres per day of deionised water. A wall mounted product that does not require mains electricity due to cartridge exhaustion being indicated by colour change resin. A coil & gun can be added for accurate dispensing. This product is ideal for intermittent use, with a typical output of 160 litres based on a supply containing 200mg/l of total dissolved solids. Supplied with 2 * D340 Cartridges

This product is currently out of stock and unavailable.

SKU: N/A Category:

Description

Purite Labwater 1 deionisers

Type II / Deionised (DI) water

The Purite Labwater is a simple, cost-effective option for producing low volumes of purified water between 1 and 10μS/cm on-demand.

Purite Labwater units can easily be wall-mounted and are simply connected by a conventional hose to a laboratory tap. They operate under standard water pressure, so no additional parts are required.

The Purite Labwater uses a special resin which absorbs ionic contaminants. As the resin becomes saturated its colour changes from blue to brown to indicate when a replacement is required.

Purite Labwater | Overview

The Purite Labwater dionisation unit produces low volumes of purified water between 1 and 10μS/cm on demand, from a standard laboratory water supply. Connection to a tap or stock-cock is via a simple flexible hose. Fitting is quick and simple.

The colour-change resin indicates when replacement is required. Two versions are available, for flow rates of up to 60 l/hour. Output capacity will vary depending on water hardness; typically, capacity will be up to 1280l for soft water regions.

Purite Labwater | Unit Specification

Unit specificationLabwater 1Labwater 2
Width (mm)8080
Depth (mm)100100
Height (mm)580760
Maximum Shipping Weight (kg)*2.84.4
Maximum Working Weight (kg)*2.53.5
Installation requirementsLabwater 1Labwater 2
Feed WaterPotablePotable
Maximum TDS (ppm)10001000
Feedwater temperature1-35oC1-35oC

Purite Labwater | Technical Specification & Output Capacity

Technical specificationLabwater 1Labwater 2
Max. feed pressure (bar)0.5 – 50.5 – 5
Max. feed flow rate (l/hr)3060
Output capacity (litres)Labwater 1Labwater 2
@ 50 mg/l tds (soft)6401280
@ 200 mg/l tds (medium-hard)160320
@ 300 mg/l tds (hard)106212
pHNeutralNeutral
Conductivity10 – 1µS/cm10 – 1µS/cm

Additional information

Version

with Hose and Gun, without Hose & Gun

Reviews

There are no reviews yet.

Be the first to review “LABWATER 1 for Laboratory Quality Water”